Address : 21A St, Al Fahidi, Dubai UAE
ORDYL ® AF 200E
// A Legacy of Excellence in Dry Film Production
PRODUCT DESCRIPTION
ORDYL ® AF 200E is a negative, aqueous processable dry film specifically designed for chemical milling application to be exposed with standard UV lamps.
AF 200E is developable and strippable in mildly alkaline solutions and offers superior performances and resistance to extreme conditions of use in strongly acid solutions.
Ordyl AF 200E has excellent adhesion on stainless steel and the most common metallic alloys.
Description
Main Features
- Excellent adhesion performance on stainless steel
Available Thickness
- 20 μm (0.8 mils)
- 30 μm (1.2 mils)
- 40 μm (1.6 mils)
- 50 μm (2 mils)
Typical Application
- Chemical Milling
Exposure
We recommend using UV lamps or laser source with emission peak at 360 – 380 nm.
The following parameters are referred to:
6-9 Solid STEP of SST21
7-18 Solid STEP of RST25
The following parameters are referred to:
6-9 Solid STEP of SST21
7-18 Solid STEP of RST25
| AF 220E | AF 230E | AF 240E | AF 250E | |
|---|---|---|---|---|
| Energy (mJ/cm²) | 80-130 | 100-150 | 120-170 | 130-180 |
| Resolution | 30 µm (1.2 mils) | 40 µm (1.6 mils) | 50 µm (2 mils) | 60 µm (2.3 mils) |
Developing (B.P. 60%)
| AF 220E | AF 230E | AF 240E | AF 250E | |
|---|---|---|---|---|
| Developing time | 45 sec. | 60 sec. | 85 sec. | 120 sec. |
| Dry Film load 1g/l | 0.05 m²/l | 0.03 m²/l | 0.025 m²/l | 0.017 m²/l |
We recommend a maximum Dry Film load of 5 g/l.